LHI CL-0615 Blade Nano QX / Blade Fast Upgraded Motors for Inductrix "Tiny Whoop" Apex RC Products

Verwunderlich LHI CL-0615 Blade Nano QX / Blade Fast Upgraded Motors for Inductrix "Tiny Whoop" Apex RC Products das kannst du jetzt haben. Dieses produkt hat gute qualität und natürlich mit erschwinglichen preis können sie es haben.



Beschreibung:
Motors come with plugs and correct wire length (7cm) for the Nano QX.
--> Installation instructions!
CL-0615-14: High performance motors for the Blade Nano QX.
Skill level: intermediate to expert
If you are comfortably flying your Nano QX and want more power - this is the motor for you.
The CL-0615-14 is a powerful little beast - be careful with the throttle!
Warning: These motor will turn your nQX into a pocket rocket, and it will not like hovering!
Depending on the battery you use, you will see varying degrees of oscillations (wobble) during hover and slow flight in SAFE mode. Agility mode does not have this problem, and all you need to do to get around this in SAFE mode: throttle up!
If you are learning or just prefer slow flying, you should look at the 0615 motor instead.
performance data:

speed: 14.000Kv
operating voltage: 1.5-3.7V
max. thrust: 15g (direct drive)
1.0A load current at 3.7V (direct drive)
dimensions:

can diameter: 6mm
can length: 15mm
shaft diameter: 0.8mm
shaft length: 5mm
weight: 1.8g
wire length: 70mm
plug: Micro-JST-1.25
All motor packs contain equal amounts of clockwise and counter clockwise motors. To maximize performance and life span, don't run them in reverse!

Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -

Please note: wire color coding is reversed from the stock motors. (Blade has decided to code their motors differently to everyone else in the industry..)




Funktionen:
  • INCLUDES: 2CW & 2CCW Motors
  • Excellent for converting a Blade Inductrix into a "Tiny Whoop"
  • Works great as an upgrade for the Blade Nano QX or Blade Inductrix 1.25mm Micro-JST plugs right into the Nano QX or Inductrix board
  • Super Fast 55,000rpm / 14,865kv